Installing Panels in Stopper Systems
Our Stopper Systems allow you to install panels without the use of fasteners. Conceptual images are below. 130-25 Stopper System 150-45 Stopper System 150-45 Thermal Break Stopper System What gasket
Our Stopper Systems allow you to install panels without the use of fasteners. Conceptual images are below.
130-25 Stopper System
150-45 Stopper System
150-45 Thermal Break Stopper System
What gasket should I use?
Modular Framing Systems sells 3/4in wide x 1/8in thick, closed cell neoprene foam gasket with an adhesive back (gasket tape). You can use any gasket that meets your project specs just be sure to consider the relationships between panel thickness, gasket thickness, and gasket compression.
Watch A Quick Instructional Video
Related posts
How do I know how tall the frame needs to be for my coil and drain pan?
There are numerous factors that go into properly designing the correct fit between your box and coil. The notes below are for general reference use only and serve only as
How do I size panels and account for the appropriate clearances?
** The standard production tolerance on panels is +/- 1/16in. For fixed panels, most customers allow for a 1/16in reduction in size from the panel opening. When considering production tolerances
How do I calculate my cut lengths for the different framing systems?
Calculating the cut length on extrusions is most commonly done by deducting the exposed portion of the corner joints from the overall desired outside dimensions or you box. For example: