Blade
- Material:
- Aluminum 6063
- Dimension:
- 4 in / 100 mm
- Treatment:
- T5
- Finish:
- Mill
- Gasket:
- Thermoplastic Rubber
Dampers
Light Standard Damper
Our Light Standard Opposed Blade Dampers feature a 100mm / nominal 4” blade, all aluminum construction, and a fiberglass reinforced nylon gearing system that is housed internally. No failure due to rust, corrosion, or debris accumulation. All of our dampers are made to order with short lead times.…
- Material
- nylon
- Working Temperature: Minimum
- -20 °C
- Working Temperature: Maximum
- 80 °C
- Working Temperature: Single Section Maximum Width
- 55 in.
Air opening dimensions
Enter the clear air opening height and width, rather than outside frame dimensions. Add a row for each size.
DraftMATE sizing tool
Enter product dimensions and generate a drawing before you request a quote.
Size Your DamperOr call 713-538-2050 · Mon–Fri 7am–4pm CT
Light Standard Opposed Blade Aluminum Damper
Our Light Standard Opposed Blade Dampers feature a 100mm / nominal 4” blade, all aluminum construction, and a fiberglass reinforced nylon gearing system that is housed internally. No failure due to rust, corrosion, or debris accumulation. All of our dampers are made to order with short lead times. Single and multi-sectional dampers can be easily made for normal open/close operation as well as face & bypass operation.
What's inside
The parts that make up the Light Standard Damper.
Frame
Nominal 5 in wide, U-shape
Blade Blocks
- Material:
- Polyammide and fiberglass PA6 + GF 20%
- Color:
- Black
Gears
- Material:
- Copolymer polypropylene and fiberglass
*Optional flame retardant V-5
Control
1/2 in Square Control Shaft
*Optional die-cast aluminum handle
